SBIR-STTR Award

Development Of A Single Motor Propelled Wheelchair (Simpl-Wc) Phase Ii
Award last edited on: 10/9/12

Sponsored Program
SBIR
Awarding Agency
NIH : NICHD
Total Award Amount
$917,713
Award Phase
2
Solicitation Topic Code
-----

Principal Investigator
Chris Willems

Company Information

Out-Front (AKA: Three Rivers Holdings LLC)

1826 West Broadway Road Suite 43
Mesa, AZ 85202
   (800) 545-2266
   customercare@out-front.com
   www.out-front.com
Location: Single
Congr. District: 09
County: Maricopa

Phase I

Contract Number: 1R43HD058376-01A1
Start Date: 00/00/00    Completed: 00/00/00
Phase I year
2008
Phase I Amount
$102,800
Due to the aging baby-boom generation and improvements in healthcare, the average age of the US population is increasing and is projected to continue to increase for decades (www.census.gov). The demand for assistive technologies such as electric powered wheelchairs (EPWs) and scooters have kept close pace with the increasing elderly population, as demonstrated by the sharp increases in Medicare spending on these devices (Scooter and EPWs increased by an average of 25% between years 2002 and 2003). The devices available fall into two general categories: highly maneuverable EPWs and the lower-cost, less maneuverable, and less stable Scooters (officially classified as power operated vehicles (PoVs)). PoVs provide functional mobility in well-built open spaces-such as shopping malls, paved roads and sidewalks, etc., but provide poor mobility in most home environments. And while EPWs can provide functional mobility in all locations, insurance companies typically reimburse for the high cost of these devices only if an individual cannot safely ambulate in their home. Meanwhile, one of the efforts to curb increasing healthcare costs has been to make EPW eligibility criteria more stringent, which has restricted many individuals from receiving them. The goal of this SBIR is to develop a single motor propelled wheelchair (SIMPL-WC) which meets the performance (maneuverability, stability, and durability) of EPWs, but is priced similar to PoVs. This device developed under this grant will be based on a proof-of-concept design which was targeted for developing countries and was tested in preliminary focus groups. Further development and testing needs to be performed to evaluate the feasibility of the SIMPL-WC according to performance and durability requirements in the US, and according to the needs and expectations of US consumers. Novel characteristics of the device which afford increased maneuverability at a low cost include: (1) independent suspension, which is linked to the drive wheel and proactively increases traction in rough terrain, (2) a single hub-style drive wheel which is lower cost and less complicated compared to both EPWs and PoVs drive components, (3) a manual steering system which allows a significantly lower cost controller to be used, (4) a short wheelbase and the ability for the device to turn around in its own footprint (highly maneuverable, like an EPW), and (5) an adjustable EPW seat, which can accommodate special seating systems (like an EPW). A prototype of the SIMPL-WC will be developed with minor upgrades from the previously prototype designed. The performance of the device will then be evaluated based on American National Standards Institute/Rehabilitation Engineering and Assistive Technology Society of North America (ANSI/RESNA) wheelchair standards. Focus groups will be held to record feedback from potential users and clinicians to determine whether the SIMPL-WC provides functional mobility during activities of daily living (ADLs) which is comparable to that of an EPWs and exceeds that of a PoV; these focus groups will also address the marketability of the device among the user population. Finally, a cost analysis will be performed to determine the approximate cost of the SIMPL-WC relative to PoVs and EPWs. These data will be used to guide the design and evaluation for the Phase 2 research project.

Public Health Relevance:
Healthcare costs and demands for assistive mobility devices such as electric powered wheelchairs (EPWs) and power operated vehicles (POV, or `scooters') are keeping in pace with our increasing population of older Americans. What are critically needed are new technologies which are tailored to the mobility and lifestyle needs of these older individuals, but are low-cost, to helping to curb rising healthcare costs. The purpose of this research is to develop a single motor propelled wheelchair (SIMPL-WC) which performs similarly to an EPW, but is priced similarly to a PoV.

Public Health Relevance:
7. Project Narrative Healthcare costs and demands for assistive mobility devices such as electric powered wheelchairs (EPWs) and power operated vehicles (POV, or `scooters') are keeping in pace with our increasing population of older Americans. What are critically needed are new technologies which are tailored to the mobility and lifestyle needs of these older individuals, but are low-cost, to helping to curb rising healthcare costs. The purpose of this research is to develop a single motor propelled wheelchair (SIMPL-WC) which performs similarly to an EPW, but is priced similarly to a PoV.

Thesaurus Terms:
There Are No Thesaurus Terms On File For This Project.

Phase II

Contract Number: 2R44HD058376-02
Start Date: 9/30/08    Completed: 3/31/13
Phase II year
2011
(last award dollars: 2012)
Phase II Amount
$814,913

There is a trend of increasing modularity within powered mobility devices (PMDs) motivated by clinicians and end-users requesting more customized and appropriate mobility solutions. Unfortunately, PMDs (Scooters and Electric Powered Wheelchairs) provide distinct sets of features and non-overlapping performance, severely restricting the benefits that true modularity could provide. Consequently, and in spite of the clinicians' and users' preference, the prescribed device is often inadequate or includes unnecessary and costly features. To address the shortcomings of PMDs, we have developed a Single Motor Propelled Wheelchair (SIMPL-WC) that incorporates a novel drive-train which allows for a true continuum of PMD solutions. The SIMPL-WC allows the clinician and user to select any combination of features, including steering type (manual/power), user interface, seating functions (powered/unpowered) which can be applied to one underlying device which is low-cost and performs well in all terrains and environments. The goal of this project is to finalize the design and testing of the SIMPL-WC. Specifically, we will perform design modifications to the Phase-I prototype suggested by stakeholders and perform a short- production run and conduct standards testing, focus groups, and field-trials with end-users. Additionally, we will design, fabricate and test the powered turning module (SIMPL-PTM) and the powered seating module (SIMPL-PSM). At the completion of the grant, testing, manufacturing and regulatory elements will be in place to facilitate successful commercialization.

Public Health Relevance:
The demand for powered mobility devices (PMDs) such as Scooters and Electric Powered Wheelchairs increases yearly due to our aging population, and has put an increasing burden on our healthcare industry to control and cut costs. Rather than innovate, manufacturers have cut costs by reducing quality, which has resulted in safety concerns for PMD users. The goal of this project is to finalize the research, development, and quality testing of a low-cost PMD which provides effective indoor and outdoor mobility, and includes a series of optional modules so the device can be tailored according to the needs of individual users.

Thesaurus Terms:
Address;Analysis, Data;Area;Code;Coding System;Data Analyses;Development;Development And Research;Devices;Electric Wheelchair;Environment;Esthetics;Feedback;Focus Groups;Funding;Goals;Grant;Health Care Industry;Health Insurance For Aged And Disabled, Title 18;Health Insurance For Aged, Title 18;Health Insurance For Disabled Title 18;Healthcare Industry;Individual;Industry;Industry, Healthcare;Joystick;Leg;Manuals;Manufacturer;Manufacturer Name;Medicare;Modeling;Modification;Motor;Performance;Phase;Powered Wheelchair;Price;Production;Questionnaires;R &D;R&D;Rfp;Regulatory Element;Regulatoryelement;Request For Proposals;Running;Safety;Sales;Secure;Series;Solutions;System;System, Loinc Axis 4;Testing;Time;Title 18;Training;Travel;Wheel Chairs;Wheelchairs;Work;Aging Population;Base;Commercialization;Cost;Design;Designing;Health Insurance For Disabled;Innovate;Innovation;Innovative;Input Device;Meetings;Mobile Assistance Device;Mobile Assistance System;Mobile Assistive Device;Mobile Assistive System;Model;Novel;Preference;Pricing;Prototype;Rehab Engineering;Rehabilitation Engineering;Research And Development;Response;Trend;User-Friendly