SBIR-STTR Award

Micron-scale Direct-detection X-ray Detectors
Award last edited on: 9/5/2019

Sponsored Program
SBIR
Awarding Agency
DOE
Total Award Amount
$1,149,998
Award Phase
2
Solicitation Topic Code
14a
Principal Investigator
Andrew S Huntington

Company Information

Voxtel Inc

15985 NW Schendel Avenue Suite 200
Beaverton, OR 97006
   (971) 223-5646
   info@voxtel-inc.com
   www.voxtel-inc.com
Location: Single
Congr. District: 01
County: Washington

Phase I

Contract Number: DE-SC0019697
Start Date: 2/19/2019    Completed: 2/18/2020
Phase I year
2019
Phase I Amount
$149,999
Techniques such as high?energy x?ray microscopy and Bragg coherent diffraction imaging are being developed. These techniques provide unique structural information at the micro? and nano?scale for the discovery of novel materials. However, due to the limitations of suitable detectors, these techniques are severely limited when applied at high x?ray energies (> 30 keV). In particular, these techniques require detectors with micron? scale spatial resolution that are also efficient at the high x?ray energies. Such detectors do not currently exist. To address this need, in this SBIR effort, we will manufacture large?area high?energy x?ray detector arrays, with micron?scale pixel resolution, with performance optimized for emerging applications that benefit from the coherence and higher brilliance available from emerging diffraction?limited synchrotron light sources. Our approach directly sensitizes silicon CMOS imager readout integrated circuits (ROICs) with x?ray?sensitive colloidal quantum dot (CQD) nanocrystal detector films to realize robust high?performance fine?pixel?resolution direct?detection arrays. This approach eliminates both the need to manufacture large single?crystal detector arrays and the need to perform die?level hybridization of crystalline semiconductor detectors to the silicon readout circuits, which is difficult to do for micro?scale detector pitches. In Phase I, we will manufacture a number of test arrays that demonstrate the performance of the CQD detector films for imaging greater than 30 keV X?rays. Our effort will start with PbI2 nanocrystal detector structures, which we have previously shown effective for fabricating highly stable high? performance high?energy x?ray detectors. If deemed beneficial, we may also explore HgI2 nanocrystal detector films, or PbI2 / HgI2 heterostructures—we are experienced at manufacturing and integrating both into detectors. Detector test structures, consisting of simple field?effect transistor (FET) structures and small?sized arrays of various detector geometries, will be used to characterize performance and to demonstrate high conversion efficiencies and fine spatial resolution. Then, a 15?micron 1K x 1K photovoltaic x?ray imager will be fabricated and demonstrated. From their discovery to this day, X?rays have been used for characterization of the spatial distribution of matter, imaging encompasses fields from medical applications to x?ray microscopy and even crystallography. X?rays are valued for their penetration power, their specificity of contrast, and their short wavelength underpinning the potential for high?resolution microscopy. Emerging diffraction?limited synchrotron light sources will increase the coherent flux up to a few orders of magnitude and reduce the horizontal beam divergence, which in turn will increase the brilliance enabling techniques that provide unique structural information at the micro? and nano?scale, which will accelerate the pace for the discovery of novel materials that can impact every aspect of our daily lives, including the generation, transmission and use of energy.

Phase II

Contract Number: DE-SC0019697
Start Date: 4/6/2020    Completed: 4/5/2022
Phase II year
2020
Phase II Amount
$999,999
Experiments taking full advantage of recent upgrades to Department of Energy x?ray light sources are limited by the performance of available high energy x?ray detectors. High energy x?ray detectors using new materials with sensitivities and resolution that exceed currently available technologies are being developed. These new detectors use solution?processed materials and can be made directly on existing readout electronics, making upgrades to existing equipment easy and low cost. In Phase I, the feasibility of these new solution?processed materials in high?energy x?ray detection was demonstrated. Unoptimized detectors had sensitivities exceeding currently available technologies and were demonstrated in a high?resolution imaging array. In Phase II, detector films will be optimized by increasing the absorber layer thickness to absorb greater than 95% of incident high energy x?rays. Device stability will be characterized and improved if needed and imaging resolution limitations will be identified. A prototype imaging panel will be developed and demonstrated at a Department of Energy x?ray light source. Improved high energy x?ray detectors will have broad impacts in areas beyond material research, including industrial non?destructive testing and quality control, border security, and medical imaging. High?energy x?rays can penetrate denser and thicker materials than soft x?rays, and increased resolution will provide details previously missed. Increased sensitivity is especially important in medical imaging, where x?ray dose requirements will be reduced.